UV Nagellack No. 97: Common 4in1 Application Questions
By Nail Wraps from Colour Flash - self-adhesive | Published: 2026-10-31
Category: How-to Guides
Get clear answers to the most common application questions about UV Nagellack No. 97, the 4in1 polish with a no-wipe formula. Learn how to apply, cure, and troubleshoot for a flawless manicure.
Quick answer
UV Nagellack No. 97 is a 4in1 polish that combines base coat, color, top coat, and a no-wipe formula in one bottle. Apply it in thin layers, cure each layer under a UV/LED lamp, and you can skip the separate base and top coat steps—just remember to cap the free edge for the longest wear.
Why the no-wipe formula changes your application routine
The no-wipe formula in UV Nagellack No. 97 means you don't get a sticky inhibition layer after curing. That saves you the step of wiping the final layer with alcohol, but it also means you should avoid touching the cured surface before you're ready to finish. If you're used to wiping, you can skip it entirely—the shine is already there.
Common curing questions and what to check first
Curing issues often come down to lamp power, layer thickness, or how fresh your bulbs are. UV Nagellack No. 97 cures like most UV gels, but if you notice tackiness or wrinkling, check that your layers are thin and that your lamp is strong enough for gel polish. Always follow the lamp manufacturer's recommended cure time.
UV Nagellack No. 97 application FAQ
- How many layers should I apply?
- Apply two thin layers of color for even coverage. Thin layers cure more reliably and prevent wrinkling. If you need more opacity, add a third thin layer rather than a thick one.
- Do I need a base or top coat with this 4in1 polish?
- No, UV Nagellack No. 97 already includes base coat, color, and top coat. Using separate base or top coats is unnecessary and may interfere with the no-wipe finish.
- How long should I cure each layer?
- Cure each layer under a UV/LED lamp according to your lamp's instructions—typically 30–60 seconds for LED lamps. Always check your lamp's manual for exact times, as curing power varies. If you're unsure about your lamp's strength, test on a swatch first.
- Why does my polish look dull after curing?
- A dull finish usually means the layer was too thick or the lamp didn't cure it fully. Try thinner layers and ensure your lamp bulbs are clean and not expired. The no-wipe formula should stay glossy without wiping.
- Can I use UV Nagellack No. 97 on natural nails?
- Yes, it's designed for natural nails. Proper prep—cleaning, dehydrating, and using a ph-bond—helps adhesion. Avoid flooding the cuticle area to prevent lifting.
- How do I remove UV Nagellack No. 97?
- Soak nails in acetone for 10–15 minutes, then gently push off the softened polish. Do not force or peel it off, as that can damage the nail plate.
Product facts
- UV Nagellack No. 97 (4in1, 10ml): 4in1 UV Nagellack combines base coat, color, top coat, and a no-wipe formula in one product. This means you can streamline your manicure to fewer steps, saving time and product.
UV Nagellack No. 97 (4in1, 10ml)
